Most cleaning schedules fail the same way. They are written once, laminated, stuck on a wall and quietly ignored by the second week. A schedule that holds up is shorter than you expect, owned by named people and tied to the moments when work actually happens. This guide uses MPI's National Programme 2 guidance (December 2025) as its reference, along with Auckland Council's verification page.
MPI's guide treats these as two separate jobs. Cleaning removes dirt, grease and most bugs from surfaces. Sanitising kills the harmful bugs left on a clean surface. The guide also says sanitisers do not work properly on unclean surfaces, so you always clean before you sanitise. A schedule that says "sanitise benches" without a cleaning step first is describing the wrong sequence.
The rules in the guide are plain: sweep, vacuum or mop floors, wipe benches and clean food contact surfaces, equipment, staff facilities and storage areas regularly and when needed. Use hot soapy water or suitable cleaning chemicals, such as food-grade products, according to the label. Always sanitise food contact surfaces and equipment after cleaning, using sanitising chemicals designed for food areas.
The guide gives few fixed intervals, which is why schedules vary. What it does say is useful. Food contact surfaces and equipment need cleaning every day they are used, and it is best to clean as you go. If food contact areas are not used for a few days or from season to season, they should be cleaned before use again to remove settled dust. Staffrooms, bathrooms and toilets also need cleaning, to reduce the chance of bugs travelling from those areas into food handling spaces.
From that, a workable structure has three layers:
The guidance tells you what a verifier is likely to ask: how you clean equipment or food contact areas that are hard to get to, and how you remember to clean things that only need occasional attention, such as ceilings and light fixtures. That is where schedules tend to be thin. Put these items on a rotating weekly or monthly list, one or two a day, so the work is spread and never lands in one miserable Sunday.
The guide also names the cleaning equipment itself as a contamination source. Brooms, mops and cloths should be cleaned regularly, and the guide recommends disposable cloths or washing cloths after each use. Cleaning gear and chemicals are to be stored away from food.
For cleaning and sanitising, the National Programme 2 guidance says you do not need to keep records, but some businesses like to use a cleaning schedule or cleaning record, and MPI provides examples in its record blanks. Your own plan may be different, so check the section of your template or programme that applies to you.
Even when records are optional, a signed sheet is the easiest way to answer a verifier who asks how you know the job is done. It also shows if a job has been missed for a week. Keep it simple: date, task, initials. The MPI guide says records can be kept in whatever way suits, including photos, whiteboards or electronically, and that they need to be kept for a minimum of four years.
Cleaning products are themselves a hazard if they reach food. The guide lists them as chemicals that can contaminate, and says chemical products must be fully labelled, stored safely and used following the manufacturer's instructions. Decanted products should sit in containers that cannot be mistaken for food containers. Include a line in your induction on where chemicals live and why they are never stored near ingredients.
According to the guide, a verifier will look around to check everything looks clean and tidy, and will ask you or staff when and how you clean and sanitise. Staff answers matter as much as the sheet. Walk new staff through the schedule on day one, and ask them to explain a job back to you.
Auckland Council's verification page describes the same approach: observe, ask questions, talk with staff and check records. If a cleaning problem is found, it may be recorded as a Corrective Action Request with an agreed time to fix it.
If a task is repeatedly missed, find out why before blaming the person. Common reasons are not enough time at close, missing supplies, unclear methods or a job nobody owns. Make a change, write down what you changed, and review again in a fortnight.