Food safety rules protect customers. Health and safety rules protect the people who cook for them. In a small cafe or takeaway the two overlap constantly, since a cluttered floor, a rushed shift and a blunt knife are bad for both. WorkSafe has published practical guidance for the hospitality sector, and most of it comes down to ordinary good sense applied early.
Under the Health and Safety at Work Act 2015, WorkSafe's guidance for cafes and restaurants says every business must ensure, so far as is reasonably practicable, the health and safety of its workers, and that other people, including customers and visitors, are not put at risk by the work of the business. The approach is the same across WorkSafe's pages: first eliminate the risk if you reasonably can, and where you cannot, minimise it with controls that are proportionate to the risk and suit your work.
WorkSafe also points out why hospitality is a challenge. Most workers are part-time and work late nights and weekends, and with high staff turnover, health and safety training is often rushed or overlooked. A small business can fix that by treating induction as a real task with a checklist.
The cafes and restaurants page lists the main risks as cuts, burns and scalds, lifting, carrying, pushing and pulling, slips, trips and falls, bullying and violence. This article focuses on the physical ones that cause most injuries in the kitchen.
WorkSafe's page on cuts lists the ways kitchen workers get hurt: using knives for jobs they were not designed for, such as opening bags or boxes; sharpening; taking knives out of storage; cleaning slicers and touching the blade edges; handling knives unexpectedly while washing up; putting knives blade-up in a dishwasher; and handling broken glass or crockery, graters and peelers.
Its suggestions for controls are practical and cheap:
A box cutter by the delivery door removes the temptation to open cartons with a chef's knife. A rule that knives are washed by hand and never left in the sink of soapy water removes another common hazard.
WorkSafe's page on burns and scalds notes that workers who are constantly exposed to heat from flames or steam are at risk of burns that can be serious. It lists causes including knocking over pots with handles sticking out, slipping and falling onto hot objects, steam or splash-back from coffee machines, splattering oil, carrying hot items in tight spaces, using caustic chemicals and water that is too hot.
Controls from the same page include:
Oil change day is a good one to plan: cool oil, a proper container, a second person if the container is heavy, and a path cleared in advance.
WorkSafe lists slips, trips and falls among the main hospitality risks, and a wet kitchen floor is the classic example. The pattern that works is short: clean up spills immediately, keep walkways clear, put mats where water collects, and wear shoes that suit wet floors. For any floor you cannot clean while staff are around, keep people off it until it is dry.
Bring this into the closing routine. The MPI template food control plan says to check premises for signs of deterioration, such as holes in floors, and fix them as required. A torn mat or a lifted tile is a food safety defect and a trip hazard in one.
Cartons of tins, sacks of flour and full stock pots are heavy. WorkSafe's burns guidance includes using equipment that can be safely lifted by one person or, where that is not possible, training workers to lift in twos. Buy in smaller pack sizes if they are available, use a trolley for deliveries and store heavy items between knee and shoulder height.
Cleaning chemicals and oven cleaners are a health and safety issue as well as a food safety one. WorkSafe says safety data sheets are mandatory for each hazardous substance you use or store, and it expects them to guide storage and handling. See the separate article on storing chemicals in commercial kitchens for more on this.
Every WorkSafe page in this area repeats the same advice: get your workers involved. Make sure they know how to make suggestions, ask questions or raise concerns. Ask them to help identify risks and how to eliminate or minimise them, because people are more likely to take responsibility when they have been part of the conversation. WorkSafe also says to treat contractors and temporary staff as part of the team, since they often spot issues and suggest practical, low-cost solutions.
A five-minute check at the start of the week, with a few specific questions, does more than a folder of policies. For example: what nearly hurt someone last week? Is there a spill spot that keeps coming back? What equipment is awkward or blunt?
If someone is seriously hurt, call emergency services first. Check WorkSafe's website for current guidance on what must be notified to the regulator.