A tired cafe interior is easy to spot: scuffed walls behind the counter, flaking paint near the dishwasher, a ceiling that has gone yellow over the fryer. A repaint fixes more than appearances. It can also fix surfaces that are hard to clean, which matters when your premises are checked against a food control plan.
But painting a working food space is not the same as painting a lounge. There are food safety, health and practical questions to settle before anyone opens a tin.
MPI's template food control plan for cafes and takeaways asks that buildings, fittings, fixtures and equipment be made of materials that will not be a source of bugs, chemicals or foreign matter getting into food, or that you work out how to minimise the chance of contamination. It also says areas where food is processed or stored must be easy to clean and sanitise when appropriate, and it limits the dust, dirt, fumes and pests that can get into buildings used for handling, making or storing food.
That is the test for a repaint. Peeling paint can land in food. Chipped surfaces and cracks give pests and dirt somewhere to hide, and the template notes that bugs like to hide and grow in cracks, crevices or holes near where food is stored or handled. A smooth, sound, washable finish is easier to clean and easier to show to a verifier.
Surfaces to think about first:
Ask your painter to deal with the cause of flaking or staining first, whether that is a leak, condensation or poor extraction. Paint over a damp wall and it will simply fail again.
Before you choose a product, ask for its safety data sheet. The government's Building Performance site recommends this for paint generally, since the sheet describes health and environmental effects and handling precautions. The same guidance explains that water-based products have lower solvent emissions than solvent-based ones, and that water-based acrylics can still contain volatile organic compounds, so it is worth checking the label.
For a food premises, ask the supplier or painter about:
You are not choosing paint for food contact, but you are choosing something that sits a few metres from open food. Keep that in mind and ask the painter to confirm in writing that the product suits an indoor commercial food area.
If your building is old, find out what you are about to sand. The Building Performance site notes that paint from the 1970s and earlier often contained lead pigments, and says to take extra care when scraping, sanding and stripping older paint. Lead dust is a particular risk for small children, but it is a hazard for workers too. The Ministry of Health's guidelines on managing lead-based paint were published in 2013, and the Ministry notes the removal advice is still relevant, although some of the legislation they refer to has changed since.
The Building Performance guidance suggests test kits from paint and hardware stores to check older paintwork, and it recommends dust masks or respirators that meet the relevant joint Australian and New Zealand standard, wet sanding to reduce airborne dust, and careful containment and disposal of dust and scrapings. A professional painter should already know this, but a commercial landlord or building manager should raise it before the job starts, not halfway through.
Even with lead ruled out, sanding creates dust and painting creates fumes. In a food premises, that means planning how to keep dust out of food, equipment and storage:
Keep painting products and solvents in a labelled, closed area away from food. The template says chemicals used for maintenance must be fully labelled, stored, sealed and used according to the manufacturer's instructions, and stored in containers that are clearly different from food containers. Do not decant paint or thinners into drink bottles or food tubs, however convenient it seems on the day.
A repaint is routine maintenance, so it does not need approval in the way a change to what you make or sell might. Still, your verifier looks at whether the premises are in good condition and whether surfaces are cleanable. The template says to check premises for signs of deterioration, such as holes in floors and walls, and fix them. Keeping a short note of what was done, when and by whom, along with the product used, takes two minutes and answers the question if it is asked.
If a repaint is part of a bigger fit-out, such as moving a bench or changing a layout, talk to your verifier or council before you start. Changes to equipment layout and the way food flows through the premises are exactly what they like to hear about in advance.
Look for a painter who has done food premises before, and ask them how they stage the work around food areas. Some firms specialise in this sort of job; a company offering commercial painting will usually be more used to working around trading businesses than a general residential painter. Whoever you choose, get the scope, products and timing in writing.
If you are weighing up a shortlist, Eggshell & Co is one Auckland painting company that lists a commercial service. The key questions are the same for anyone: what will they use, how will they protect your food areas and when can you reopen?